Using Blown-In Insulation Material In Your Home

Most brand new houses today are being built with high standards for energy efficiency. Although, it isn’t really the case for older homes. The most effective thing you’re able to do to make your home very energy efficient is to add insulation. It is not easy to accomplish for those who have exterior side walls but it is possible with blown-in insulation in your attic. The insulating material will help keep your house warmer during the winter and cooler over the summer. If your property is fairly old, you may have nothing but newspapers in your walls for insulation.

You will see that insulation technology is amazingly advanced because of our concern for preserving energy and saving the environment. Substances used for insulation are given an R-value, which is used to determine the degree of insulation needed in any given environment. Very cold locations require a much higher R-value, than places with moderate temperatures. Possibly one of the best solutions to reduce your heating bill is blown-in insulation. There are many benefits of using blown-in insulation instead of fiberglass insulation rolls, like installation, energy efficiency and where it can be used.

There are various good points why blown-in insulation will be the way to go, one of them is that it can easily be adjusted. You are able to vary the R-value by exactly how much insulation you choose to use. No matter if your house needs a high R-value insulation or low R-value insulation, all you need to do is blow the amount required to achieve the proper R-value. Another reason for using blown-in, is that nearly all products use virgin materials, that have lowered the chance of allergies. Youll also have a more effective seal considering that the materials can fill in cracks and crevices. Youll find it won’t take much work to install and all open spaces will be filled consequently making your home more energy efficient.

It will be very easy to install blown-in insulation in a house thats newly framed. All that is done is staple a netting over the exterior wall studs, then cut a few little holes, stick in the hose, and load up the wall cavity. The insulation substance will stick to the studs and will fill up the interiors of the wall. All you need to do next is to cover the walls with vapor barrier and drywall, then you are finished.  Regarding blow-in ceiling insulation, you initially drywall the ceiling, then distribute the insulation from the attic. Its a bit more difficult with older homes since the wall covering may require to be removed first before installation. Following the removal of the wall covering the procedure is just the same. If you have a really old house, with no insulation, you can just cut a hole in the wall, and blow it in, then cover up the hole.

To begin with, the price of blow-in insulation is more expensive, but it is much more efficient as an energy saver. If you prefer a comfortable  and energy  efficient  house,  then  getting  blown-in insulation is your  best bet.